查看: 10040|回复: 13

[完整特效] [J]034_Another_OP特效脚本 (附完整工程) [复制链接]

milkyjing

Administrator

TCAX Dev.

Rank: 7 Rank: 7 Rank: 7

电梯直达

楼主

发表于 2012-2-24 21:37:13 |只看该作者 |倒序浏览

说明, 如果要直接执行本脚本, 请升级TCAX到最新版 (1.1.8), 附件为完整工程
说明2, 本特效用到的一些效果会陆续写成教程...
其一, TCAS fade流

from tcaxPy import *
from util.magick import *
from pixLibs.ImageStone import *
def tcaxPy_Init():
global _Fs
global _FD # 一帧的持续时间, 约40毫秒
global _Spacing # 字体间距
global Font # 首要字体
global FontOut # 字体边框
global FontOut2 # 字体边框2
global COLORS # 边框二颜色
global IMG_tex # 主要纹理
_Fs = GetVal(val_FontSize)
_FD = 1000 / GetVal(val_FXFPS)
_FontFileName = GetVal(val_FontFileName)
_FaceID = GetVal(val_FaceID)
_Spacing = GetVal(val_Spacing)
Font = InitFont(_FontFileName, _FaceID, _Fs, _Spacing, GetVal(val_SpaceScale), 0xFFFFFF, 0, 0)
FontOut = InitFont(_FontFileName, _FaceID, _Fs, _Spacing, GetVal(val_SpaceScale), 0xFFFFFF, 3, 1)
FontOut2 = InitFont(_FontFileName, _FaceID, _Fs, _Spacing, GetVal(val_SpaceScale), 0xFFFFFF, 2, 0)
COLORS = ['000000', '00BB00', 'FF0000', '00AA00', '0000FF', 'FFFF00', 'FF0000', '00FFFF', 'FFFFFF']
IMG_tex = Image('images\\blood.jpg')
def tcaxPy_Fin():
FinFont(Font)
FinFont(FontOut)
FinFont(FontOut2)
# 用户修订版的tcaxPy_Main函数, 保留原始tcaxPy_Main风格是为了减少额外记忆量, 实际上该函数形式可以非常多样化
def tcaxPy_Main_Fake(_i, _j, _n, _start, _end, _elapk, _k, _x, _y, _a, _txt, param):
ASS_BUF = [] # 保存ASS特效
TCAS_BUF = [] # 保存TCAS特效
##### 主要特效编写操作 ####
# if _i == 3:
# _x = GetVal(val_ResolutionX) - GetVal(val_TextLength)[_i] - GetVal(val_OffsetX) + GetVal(val_TextAdvanceDiff)[_i][_j]
dx = _x - int((_a + _Spacing) / 2 + 0.5) # 一个固定操作, 将an5的坐标转换为an7
dy = _y - int(_Fs / 2 + 0.5) # ASS特效默认采用an5坐标, TCAS特效则采用an7坐标
# 文字主体
PIX = TextPix(Font, _txt)
IMG = Image(IMG_tex)
xoff = randint(0, IMG.columns() - PIX[1][0])
yoff = (randint(0, 54), randint(90, IMG.rows() - PIX[1][1]))[randint(0, 1)]
IMG.crop(Geometry(PIX[1][0], PIX[1][1], xoff, yoff))
PIX_tex = pmgToPix(IMG)
PIX_t = PixTexture(PIX, PIX_tex)
# 边框主体
PIX = TextPix(FontOut, _txt)
PIX = PixColorRGB(PIX, DecRGB(COLORS[_i]))
PIX = PixColorMul(PIX, 1, 1, 1, 0.8)
PIX_o = PixBlur(PIX, 6)
# 边框
PIX = TextPix(FontOut2, _txt)
PIX = PixColorRGB(PIX, DecRGB('0000BB'))
PIX_b = PixBlur(PIX, 2)
# 混合
PIX = CombinePixs(PIX_o, PIX_b)
PIX = CombinePixs(PIX, PIX_t)
PIX0 = PIX
# 一些时间的计算
T0 = 10 * _start - 10 * _FD + 2 * _j * _FD
T1 = T0 + 4 * _FD
T2 = 10 * _end + 5 * _FD - 2 * (_n - _j - 1) * _FD
T3 = T2 + _FD * 6
TS = 10 * _start - 40 * _FD
TK = 10 * (_start + _elapk)
TE = 10 * _end + 10 * _FD
# 第一句效果
if _i == 0:
IMG = Image(IMG_tex)
IMG.type(ImageType.GrayscaleType)
IMG.filterType(FilterTypes.CubicFilter)
IMG.resize('!{0}x{1}'.format(PIX0[1][0], PIX0[1][1]))
PIX = pmgToPix(IMG)
PIX = PixColorMul(PIX, 2, 1, 1, 1)
PIX = PixPos(PIX, PIX0[0][0], PIX0[0][1])
PIX = r2a(PIX)
mask0 = invertA(PIX)
num = int(10 * _k / _FD + 0.5) + 10
for i in range(num):
mask = addA(mask0, 255 * i / num)
PIX = PixMask(PIX0, mask)
tcas_main(TCAS_BUF, PIX, TK + i * _FD, TK + (i + 1) * _FD, dx, dy, 0)
tcas_main(TCAS_BUF, PIX0, TK + num * _FD, TE, dx, dy, 0)
IMG = Image('images\\blurred_noise.jpg')
xoff = randint(0, IMG.columns() - PIX0[1][0])
yoff = randint(0, IMG.rows() - PIX0[1][1])
IMG.crop(Geometry(PIX0[1][0], PIX0[1][1], xoff, yoff))
PIX = pmgToPix(IMG)
PIX = PixPos(PIX, PIX0[0][0], PIX0[0][1])
PIX = r2a(PIX)
mask0 = invertA(PIX)
num = 40
for i in range(num):
mask = addA(mask0, 255 * (num - 2 * i) / num)
PIX = PixMask(PIX0, mask)
tcas_main(TCAS_BUF, PIX, TE + i * _FD, TE + (i + 1) * _FD, dx, dy, 0)
# 第二句效果
elif _i == 1:
IMG = Image('images\\blurred_noise.jpg')
xoff = randint(0, IMG.columns() - PIX0[1][0])
yoff = randint(0, IMG.rows() - PIX0[1][1])
IMG.crop(Geometry(PIX0[1][0], PIX0[1][1], xoff, yoff))
PIX = pmgToPix(IMG)
PIX = PixPos(PIX, PIX0[0][0], PIX0[0][1])
PIX = r2a(PIX)
mask0 = invertA(PIX)
num = 40
for i in range(num):
mask = addA(mask0, 255 * (2 * i - num) / num)
PIX = PixMask(PIX0, mask)
tcas_main(TCAS_BUF, PIX, TS + i * _FD, TS + (i + 1) * _FD, dx, dy, 0)
tcas_main(TCAS_BUF, PIX0, TS + num * _FD, TK, dx, dy, 0)
PIX = PixBlur(PIX_t, 9) # 8, 11
tcas_keyframe(TCAS_BUF, PIX0, PIX, TK, TK + 10 * _k + 4 * _FD, dx, dy, 2, 0)
tcas_keyframe(TCAS_BUF, PIX, PixColorMul(PIX, 1, 1, 1, 0), TK + 10 * _k + 4 * _FD, T3, dx, dy, 1, 0)
# 第三句效果
elif _i == 2:
IMG = Image(IMG_tex)
IMG.type(ImageType.GrayscaleType)
IMG.filterType(FilterTypes.CubicFilter)
IMG.resize('!{0}x{1}'.format(PIX0[1][0], PIX0[1][1]))
PIX = pmgToPix(IMG)
PIX = PixColorMul(PIX, 4, 1, 1, 1)
PIX = PixPos(PIX, PIX0[0][0], PIX0[0][1])
PIX = r2a(PIX)
mask0 = invertA(PIX)
num = int(10 * _k / _FD + 0.5) + 10
for i in range(num):
mask = addA(mask0, 255 * i / num)
PIX = PixMask(PIX0, mask)
tcas_main(TCAS_BUF, PIX, TK + i * _FD, TK + (i + 1) * _FD, dx, dy, 0)
tcas_main(TCAS_BUF, PIX0, TK + num * _FD, T2, dx, dy, 0)
IMG = Image('images\\noise.jpg')
xoff = randint(0, IMG.columns() - PIX0[1][0])
yoff = randint(0, IMG.rows() - PIX0[1][1])
IMG.crop(Geometry(PIX0[1][0], PIX0[1][1], xoff, yoff))
PIX = pmgToPix(IMG)
PIX = PixColorMul(PIX, 3, 1, 1, 1)
PIX = PixPos(PIX, PIX0[0][0], PIX0[0][1])
PIX = r2a(PIX)
mask0 = invertA(PIX)
num = 40
for i in range(num):
mask = addA(mask0, 255 * (num - 2 * i) / num)
PIX = PixMask(PIX0, mask)
tcas_main(TCAS_BUF, PIX, T2 + i * _FD, T2 + (i + 1) * _FD, dx, dy, 0)
# 第四五句效果
elif _i == 3 or _i == 4:
IMG = Image('images\\radial.jpg')
IMG.filterType(FilterTypes.CubicFilter)
IMG.resize('!{0}x{1}'.format(PIX0[1][0], PIX0[1][1]))
PIX = pmgToPix(IMG)
PIX = PixColorMul(PIX, 2, 1, 1, 1)
PIX = PixPos(PIX, PIX0[0][0], PIX0[0][1])
PIX = r2a(PIX)
if _i == 3:
mask0 = PIX
else:
mask0 = invertA(PIX)
num = int(10 * _k / _FD + 0.5) + 4
for i in range(num):
mask = addA(mask0, 255 * (2 * i - num) / num)
PIX = PixMask(PIX0, mask)
tcas_main(TCAS_BUF, PIX, TK + i * _FD, TK + (i + 1) * _FD, dx, dy, 0)
tcas_main(TCAS_BUF, PIX0, TK + num * _FD, T2, dx, dy, 0)
num = 10
for i in range(num):
mask = addA(mask0, 255 * (num - 2 * i) / num)
PIX = PixMask(PIX0, mask)
tcas_main(TCAS_BUF, PIX, T2 + i * _FD, T2 + (i + 1) * _FD, dx, dy, 0)
# 第六句效果
elif _i == 5:
### 增加到 BIG_PIX 当中, BIG_PIX保存在param的第一个元素处, 关于BIG_PIX用法, 请看专门教程
BigPixAdd(param[0], PIX0, dx, dy, 0)
tcas_main(TCAS_BUF, PIX0, 10 * _start, TK, dx, dy, 0)
PIX2 = CombinePixs(PIX_o, PIX_b)
num = int(10 * _k / _FD + 0.5) + 10
for i in range(num):
IMG = Image(IMG_tex)
IMG.rotate(360 * 1.5 * i / num)
PIX = pmgToPix(IMG)
PIX = PixPos(PIX, PIX_t[0][0] + (PIX_t[1][0] - PIX[1][0]) / 2, PIX_t[0][1] + (PIX_t[1][1] - PIX[1][1]) / 2)
PIX = PixMask(PIX, PIX_t)
PIX = PixStrip(PIX)
PIX = CombinePixs(PIX2, PIX) # crash on '合' if without PixStrip, need a bug-fix, fixed in the latest tcaxLib.pyd, but PixStrip is still preferred due to performance issue
tcas_main(TCAS_BUF, PIX, TK + i * _FD, TK + (i + 1) * _FD, dx, dy, 0)
tcas_main(TCAS_BUF, PIX, TK + num * _FD, T2, dx, dy, 0)
PIX3 = PIX
num = 6
for i in range(num):
IMG = pmgToImage(PIX3)
IMG.motionBlur(0, 6 * i, 90)
PIX = PixPos(pmgToPix(IMG), PIX3[0][0], PIX3[0][1])
PIX = PixColorMul(PIX, 1, 1, 1, 0.5 + 0.5 * (num - i) / num)
tcas_main(TCAS_BUF, PIX, T2 + i * _FD, T2 + (i + 1) * _FD, dx, dy, 0)
# 第七句效果
elif _i == 6:
num = 6
for i in range(num):
IMG = pmgToImage(PIX0)
IMG.channel(ChannelType.MatteChannel)
IMG.motionBlur(0, 6 * (num - i), -90)
PIX = PixPos(pmgToPix(IMG), PIX0[0][0], PIX0[0][1])
PIX = PixColorMul(PIX, 1, 1, 1, 0.6 + 0.4 * i / num)
tcas_main(TCAS_BUF, PIX, T0 + i * _FD, T0 + (i + 1) * _FD, dx, dy, 0)
TM0 = T0 + num * _FD
TM1 = TM0 + 6 * _FD
tcas_keyframe(TCAS_BUF, PIX, PIX0, TM0, TM1, dx, dy, 1, 0)
tcas_main(TCAS_BUF, PIX0, TM1, TK, dx, dy, 0)
num = int(10 * _k / _FD + 0.5) + 4
for i in range(num):
fa = i
if fa > num // 2:
fa = num - i
if randint(0, 2) == 0:
PIX = pstEffect(PIX0, 22, 1 + 1.2 * fa)
else:
PIX = pstEffect(PIX0, 25, 1 + 1.2 * fa)
tcas_main(TCAS_BUF, PIX, TK + i * _FD, TK + (i + 1) * _FD, dx, dy, 0)
tcas_main(TCAS_BUF, PIX0, TK + num * _FD, T2, dx, dy, 0)
tcas_keyframe(TCAS_BUF, PIX0, PixColorMul(PixBlur(PIX, 12), 1, 1, 1, 0.4), T2, T3, dx, dy, 1, 0)
# 第八句效果
elif _i == 7:
if _k < 200:
num = int(10 * _k / _FD + 0.5) + 1
for i in range(num):
faX = i / num
if faX < 2 / 3:
fa = 0.8 + 0.6 * faX
else:
fa = 1.6 - 0.6 * faX
PIX = PixResizeF(PIX0, PIX0[1][0] * fa, 0)
PIX = BilinearFilter(PIX, dx, dy)
PIX = PixColorMul(PIX, 1, 1, 1, 0.6 + 0.4 * i / num)
tcas_main(TCAS_BUF, PIX, TK + i * _FD, TK + (i + 1) * _FD, dx, dy, 0)
tcas_main(TCAS_BUF, PIX0, TK + num * _FD, T2, dx, dy, 0)
PIX = PIX0
else: # {\K205}だ
PIX2 = CombinePixs(PIX_o, PIX_b)
num = int(10 * _k / _FD + 0.5) - 2
for i in range(num):
IMG = Image(IMG_tex)
IMG.rotate(360 * 1.5 * i / num)
PIX = pmgToPix(IMG)
PIX = PixPos(PIX, PIX_t[0][0] + (PIX_t[1][0] - PIX[1][0]) / 2, PIX_t[0][1] + (PIX_t[1][1] - PIX[1][1]) / 2)
PIX = PixMask(PIX, PIX_t)
PIX = PixStrip(PIX)
PIX3 = CombinePixs(PIX2, PIX)
fa = 1 + 0.4 * (num - i) / num
PIX = PixResizeF(PIX3, PIX3[1][0] * fa, 0)
PIX = BilinearFilter(PIX, dx, dy)
PIX = PixColorMul(PIX, 1, 1, 1, 0.6 + 0.4 * i / num)
tcas_main(TCAS_BUF, PIX, TK + i * _FD, TK + (i + 1) * _FD, dx, dy, 0)
tcas_main(TCAS_BUF, PIX, TK + num * _FD, T2, dx, dy, 0)
tcas_keyframe(TCAS_BUF, PIX, PixPosShift(PixColorMul(PIX, 0, 0, 0, 0), 0, 50), T2, T3, dx, dy, 2, 0)
# 第九句效果
elif _i == 8:
### 增加到 BIG_PIX 当中, BIG_PIX保存在param的第一个元素处, 关于BIG_PIX用法, 请看专门教程
BigPixAdd(param[0], PIX0, dx, dy, 0)
tcas_main(TCAS_BUF, PIX0, 10 * _start, TK, dx, dy, 0)
# IMG = Image('400x60', 'black')
# IMG.backgroundColor('black')
# IMG.fillColor('white')
# IMG.draw(DrawableRectangle(0, 28, 400, 32))
# IMG.wave(2, 100)
# IMG.randomThreshold('40%x60%')
# IMG.blur(0, 4)
# IMG.write('stroke.jpg')
IMG = Image('images\\stroke.jpg')
IMG.filterType(FilterTypes.CubicFilter)
IMG.resize('!{0}x{1}'.format(PIX0[1][0], PIX0[1][1]))
PIX_black = BlankPix(PIX0[1][0], PIX0[1][1], MakeRGBA(0, 0, 0, 255))
num = int(10 * _k / _FD + 0.5)
for i in range(num):
img = Image(IMG)
img.crop(Geometry(int(PIX0[1][0] * (i + 1) / num + 0.5) + 1, PIX0[1][1], 0, 0))
PIX = pmgToPix(img)
PIX = CombinePixs(PIX_black, PIX)
PIX = PixPos(PIX, PIX0[0][0], PIX0[0][1])
PIX = r2a(PIX)
mask = invertA(PIX)
PIX = PixMask(PIX0, mask)
tcas_main(TCAS_BUF, PIX, TK + i * _FD, TK + (i + 1) * _FD, dx, dy, 0)
tcas_main(TCAS_BUF, PIX, TK + num * _FD, 10 * _end, dx, dy, 0)
PIX2 = PIX
IMG.blur(0, 8)
PIX = pmgToPix(IMG)
PIX = PixColorMul(PIX, 2, 1, 1, 1)
PIX = PixPos(PIX, PIX0[0][0], PIX0[0][1])
PIX = r2a(PIX)
mask0 = invertA(PIX)
num = 30
for i in range(num):
mask = addA(mask0, 255 * (num - 2 * i) / num)
PIX = PixMask(PIX2, mask)
tcas_main(TCAS_BUF, PIX, 10 * _end + i * _FD, 10 * _end + (i + 1) * _FD, dx, dy, 0)
# 将结果返回给tcax进行处理 #####
return (ASS_BUF, TCAS_BUF)
def tcaxPy_User():
file_name = GetVal(val_OutFile) + '.tcas'
fx_width = GetVal(val_ResolutionX)
fx_height = GetVal(val_ResolutionY)
fx_fps = GetVal(val_FXFPS)
TCAS_FILE = CreateTcasFile(file_name, fx_width, fx_height, fx_fps)
# basic metrics
fontSize = GetVal(val_FontSize)
marginX = GetVal(val_OffsetX)
marginY = GetVal(val_OffsetY)
spacing = GetVal(val_Spacing)
lineNum = GetVal(val_nLines)
textNum = GetVal(val_nTexts)
start = GetVal(val_BegTime)
end = GetVal(val_EndTime)
kar = GetVal(val_KarTime)
elapKar = GetVal(val_KarTimeDiff)
text = GetVal(val_Text)
textLength = GetVal(val_TextLength)
advance = GetVal(val_TextAdvance)
advDiff = GetVal(val_TextAdvanceDiff)
# main loop
for i in range(lineNum):
initPosX = marginX #(fx_width - textLength[i]) / 2 + marginX # if marginX = 0, then it's just on the middle
initPosY = marginY
BIG_PIX = InitBigPix()
for j in range(textNum[i]):
if text[i][j] == '' or text[i][j] == ' ' or text[i][j] == '　':
continue
posX = initPosX + advDiff[i][j] + advance[i][j] / 2
posY = initPosY + fontSize / 2
param = [BIG_PIX]
ASS_BUF, TCAS_BUF = tcaxPy_Main_Fake(i, j, textNum[i], start[i], end[i], elapKar[i][j], kar[i][j], posX, posY, advance[i][j], text[i][j], param)
if len(TCAS_BUF) != 0:
WriteTcasFile(TCAS_FILE, TCAS_BUF)
Progress(i, j)
if i == 5:
num = 20
PIX1 = ConvertBigPix(BIG_PIX)
TCAS_BUF = []
tcas_main(TCAS_BUF, PIX1, start[i] * 10 - num * _FD, start[i] * 10, 0, 0, 1)
WriteTcasFile(TCAS_FILE, TCAS_BUF)
mask = PIX1
PIX = CombinePixs(ImagePix('images\\flare3.png'), switchRB(ImagePix('images\\flare1.png')))
#SavePix('f.png', PIX)
PIX = PixStrip(PIX)
PIX2 = PixResize(PIX, PIX1[1][0], PIX1[1][1])
for l in range(num):
TCAS_BUF = []
PIX = PixPos(PIX2, PIX1[0][0] + PIX1[1][0] * (l - num / 2) / num, PIX1[0][1])
PIX = PixMask(PIX, mask)
tcas_main(TCAS_BUF, PIX, start[i] * 10 - num * _FD + l * _FD, start[i] * 10 - num * _FD + (l + 1) * _FD, 0, 0, 1)
WriteTcasFile(TCAS_FILE, TCAS_BUF)
#progress(l + 1, num)
elif i == 8:
num = 40
PIX1 = ConvertBigPix(BIG_PIX)
IMG = Image(Geometry(PIX1[1][1], PIX1[1][0]), 'transparent')
IMG.read('gradient:black-white')
IMG.rotate(90)
IMG.type(ImageType.GrayscaleType)
IMG2 = Image(IMG)
IMG.randomThreshold('0x100%')
IMG.type(ImageType.GrayscaleType)
PIX = pmgToPix(IMG2)
PIX = r2a(PIX)
mask = invertA(PIX)
PIX = PixMask(pmgToPix(IMG), mask)
#SavePix('gradient_noise.png', PIX)
PIX = PixPos(PIX, PIX1[0][0], PIX1[0][1])
mask0 = r2a(PIX)
for l in range(num):
TCAS_BUF = []
mask = addA(mask0, 255 * (2 * l - num) / num)
PIX = PixMask(PIX1, mask)
tcas_main(TCAS_BUF, PIX, start[i] * 10 - num * _FD + l * _FD, start[i] * 10 - num * _FD + (l + 1) * _FD, 0, 0, 1)
if len(TCAS_BUF) > 0:
WriteTcasFile(TCAS_FILE, TCAS_BUF)
#progress(l + 1, num)
FinTcasFile(TCAS_FILE)
def r2a(PIX):
buf = []
width = PIX[1][0]
height = PIX[1][1]
for h in range(height):
for w in range(width):
index = 4 * (h * width + w)
# if PIX[2][index] != PIX[2][index + 1] or PIX[2][index] != PIX[2][index + 2]:
# print('note1')
# if PIX[2][index + 3] != 255:
# print('note2')
buf.append(0)
buf.append(0)
buf.append(0)
buf.append(PIX[2][index + 0])
return (PIX[0], PIX[1], tuple(buf))
def invertA(PIX):
buf = list(PIX[2])
width = PIX[1][0]
height = PIX[1][1]
for h in range(height):
for w in range(width):
index = 4 * (h * width + w) + 3
buf[index] = 255 - buf[index]
return (PIX[0], PIX[1], tuple(buf))
def addA(PIX, step):
buf = list(PIX[2])
width = PIX[1][0]
height = PIX[1][1]
for h in range(height):
for w in range(width):
index = 4 * (h * width + w) + 3
buf[index] += int(step + 0.5)
if buf[index] < 0:
buf[index] = 0
if buf[index] > 255:
buf[index] = 255
return (PIX[0], PIX[1], tuple(buf))
def switchRB(PIX):
buf = list(PIX[2])
width = PIX[1][0]
height = PIX[1][1]
for h in range(height):
for w in range(width):
index = 4 * (h * width + w)
temp = buf[index]
buf[index] = buf[index + 2]
buf[index + 2] = temp
return (PIX[0], PIX[1], tuple(buf))

复制代码

Another_OP.rar

115.95 KB, 下载次数: 4692

完整工程

2 查看全部评分

收藏1

milkyjing

Administrator

TCAX Dev.

Rank: 7 Rank: 7 Rank: 7

沙发

发表于 2012-2-24 21:40:15 |只看该作者

补上预览, http://www.tcax.org/forum.php?mod=viewthread&tid=43

文件名: [J]034_Another_OP.mkv 与 [J]034_Another_OP_(with_cn).mp4

mzlmcx

正式会员

妖木

Rank: 4

板凳

发表于 2012-2-24 22:03:01 |只看该作者

补上预览：http://v.youku.com/v_show/id_XMzUxNDQ0MDA4.html 日文版

http://v.youku.com/v_show/id_XMzUyMzI3NDMy.html 中日合并版

morofish

新手上路

Rank: 1

地板

发表于 2013-8-6 22:21:07 |只看该作者

不錯的字幕。。

亦步未城

正式会员

Rank: 4

5^#

发表于 2013-10-14 00:49:16 |只看该作者

这个视频让我半夜心慌慌啊

yyxxlc

正式会员

Rank: 4

6^#

发表于 2013-10-14 20:35:36 |只看该作者

亦步未城发表于 2013-10-14 00:49
这个视频让我半夜心慌慌啊

这个视频我每天必看~ 不看睡不着的那种233

milkyjing

Administrator

TCAX Dev.

Rank: 7 Rank: 7 Rank: 7

7^#

发表于 2013-10-14 22:42:43 |只看该作者

yyxxlc 发表于 2013-10-14 20:35
这个视频我每天必看~ 不看睡不着的那种233

这么给力

亦步未城

正式会员

Rank: 4

8^#

发表于 2013-10-15 08:01:00 |只看该作者

yyxxlc 发表于 2013-10-14 20:35
这个视频我每天必看~ 不看睡不着的那种233

yyxxlc

正式会员

Rank: 4

9^#

发表于 2013-10-15 20:58:53 |只看该作者

亦步未城发表于 2013-10-15 08:01

乃不觉得这个字幕做的很精致么！我第一次看就觉得太强了啊奶大的这个字幕和滑头鬼的那个完全不像是后期做的字幕就像是动画制作组本来就在OP上嵌着的似得仔细看的话开头的时候ANOTHER那个 A中间的那一横是最后画的这边做的字幕组的组字的最后一笔也是最后同一时间画上去的最后一句一笔消失也是这样诚然这个OP挺恐怖的（因为动画就比较血腥啦）但是重点是做的太棒了有木有！（滚来滚去）