查看: 4691|回复: 2

[已解决] 如何控制内置特效粒子速度 [复制链接]

幽闭世纪

新手

电梯直达

楼主

发表于 2015-5-1 09:34:32 |只看该作者 |倒序浏览

大家好最近尝试把论坛里前辈分享的特效脚本改造了下
其他效果基本达到预期只有粒子的移动时间希望可以减慢
但尝试修改脚本里的数值，好像没有哪个能控制时间的
from tcaxPy import *

def tcaxPy_Init():
global _FD                      # frame duration, in millisecond
global _Fs
global Font
_FD = 1000 / GetVal(val_FXFPS)
_Fs = GetVal(val_FontSize)
Font = InitFont(GetVal(val_FontFileName), GetVal(val_FaceID), _Fs, GetVal(val_Spacing), GetVal(val_SpaceScale), 0xFFFFFF, 0, 0)

def tcaxPy_Fin():
FinFont(Font)

time_gap = 1 # you can change this value to 0, or 2 or any other number
time_fac = 1 # you can change this value to 0, or 2 or any other number

def tcaxPy_Main(_i, _j, _n, _start, _end, _elapk, _k, _x, _y, _a, _txt):

ASS_BUF = []
TCAS_BUF = []       # used for saving TCAS FX raw data
tx1 = ("m 3 14 l 6 13 l 11 16 l 11 13 l 12 11 l 14 13 l 14 17 l 17 20 l 17 16 l 19 14 l 21 16 l 22 23 l 27 25 l 27 19 l 22 15 l 21 12 l 24 12 l 27 14 l 27 11 l 23 8 l 22 6 l 25 5 l 27 6 l 27 1 l 29 -1 l 31 1 l 31 6 l 33 5 l 36 6 l 35 8 l 31 10 l 31 14 l 34 12 l 37 12 l 37 15 l 31 19 l 31 25 l 37 22 l 37 16 l 39 14 l 41 16 l 41 20 l 44 18 l 44 13 l 46 11 l 47 13 l 47 16 l 53 13 l 55 14 l 55 16 l 49 19 l 52 21 l 53 23 l 51 24 l 46 21 l 43 23 l 47 25 l 47 27 l 44 28 l 39 25 l 33 29 l 39 33 l 45 30 l 48 30 l 46 33 l 42 34 l 46 36 l 51 34 l 53 35 l 52 37 l 49 39 l 54 42 l 55 44 l 53 45 l 48 42 l 48 44 l 46 46 l 44 44 l 44 39 l 41 38 l 41 42 l 40 44 l 38 42 l 38 37 l 31 32 l 31 39 l 36 42 l 38 45 l 35 45 l 31 43 l 31 47 l 36 50 l 36 52 l 34 52 l 31 50 l 31 57 l 29 59 l 28 57 l 28 50 l 25 52 l 23 52 l 23 50 l 28 47 l 28 43 l 24 46 l 21 45 l 22 43 l 27 39 l 27 32 l 21 36 l 21 42 l 19 44 l 17 42 l 17 38 l 15 39 l 14 45 l 13 47 l 11 45 l 12 41 l 7 44 l 3 44 l 5 41 l 8 39 l 7 37 l 6 34 l 8 34 l 13 36 l 16 35 l 12 33 l 11 30 l 14 30 l 20 33 l 26 29 l 19 25 l 14 28 l 11 28 l 12 25 l 15 24 l 13 22 l 8 24 l 6 23 l 6 21 l 9 19 l 4 17 l 3 14 ")
tx2 = ("m 3 14 l 6 13 l 11 16 l 11 13 l 12 11 l 14 13 l 14 17 l 17 20 l 17 16 l 19 14 l 21 16 l 22 23 l 27 25 l 27 19 l 22 15 l 21 12 l 24 12 l 27 14 l 27 11 l 23 8 l 22 6 l 25 5 l 27 6 l 27 1 l 29 -1 l 31 1 l 31 6 l 33 5 l 36 6 l 35 8 l 31 10 l 31 14 l 34 12 l 37 12 l 37 15 l 31 19 l 31 25 l 37 22 l 37 16 l 39 14 l 41 16 l 41 20 l 44 18 l 44 13 l 46 11 l 47 13 l 47 16 l 53 13 l 55 14 l 55 16 l 49 19 l 52 21 l 53 23 l 51 24 l 46 21 l 43 23 l 47 25 l 47 27 l 44 28 l 39 25 l 33 29 l 39 33 l 45 30 l 48 30 l 46 33 l 42 34 l 46 36 l 51 34 l 53 35 l 52 37 l 49 39 l 54 42 l 55 44 l 53 45 l 48 42 l 48 44 l 46 46 l 44 44 l 44 39 l 41 38 l 41 42 l 40 44 l 38 42 l 38 37 l 31 32 l 31 39 l 36 42 l 38 45 l 35 45 l 31 43 l 31 47 l 36 50 l 36 52 l 34 52 l 31 50 l 31 57 l 29 59 l 28 57 l 28 50 l 25 52 l 23 52 l 23 50 l 28 47 l 28 43 l 24 46 l 21 45 l 22 43 l 27 39 l 27 32 l 21 36 l 21 42 l 19 44 l 17 42 l 17 38 l 15 39 l 14 45 l 13 47 l 11 45 l 12 41 l 7 44 l 3 44 l 5 41 l 8 39 l 7 37 l 6 34 l 8 34 l 13 36 l 16 35 l 12 33 l 11 30 l 14 30 l 20 33 l 26 29 l 19 25 l 14 28 l 11 28 l 12 25 l 15 24 l 13 22 l 8 24 l 6 23 l 6 21 l 9 19 l 4 17 l 3 14 ")
ts = _start + _elapk
te = _end
for b in range(ts,te,100):
      fd = randint(30,100)
      wz = randint(-15,15)
      wz1 = randint(-25,25)
      wz2 = randint(-5,20)
      sj = randint(7,11)
      sj4 = randint(0,5)
      EFT1 = move(_x+wz, _y-32,_x+wz1,_y+50+wz2)+bord(0.5)+blur(2) + color2("#AEC8FF")+alpha1(255)+fsc(70,70)+alpha3(70)+fad(100,100)
      ass_main(ASS_BUF, SubL(b,b+260,sj), EFT1 , "{\p3}" + tx1)
      EFT2 = move(_x-1+wz+sj4, _y-8-32,_x-1+wz1+sj4,_y-8+50+wz2)+blur(35) + color1("FFFFFF")+alpha1(60)+alpha3(255)+fsc(70,70)+frz(65)+fad(100,100)
      ass_main(ASS_BUF, SubL(b,b+260,sj),EFT2 , "{\p3}" + tx2)
for l in range(ts,te,180):
      fd = randint(30,100)
      wz3 = randint(-25,25)
      wz4 = randint(-25,25)
      wz5 = randint(-8,25)
      sj2 = randint(7,11)
      EFT3 = move(_x+wz3, _y-32,_x+wz4,_y+50+wz5)+bord(0.5)+blur(1) + color2("#AEC8FF")+alpha1(255)+alpha3(70)+fad(100,100)
      ass_main(ASS_BUF, SubL(l,l+130,sj2),EFT3 ,"{\p4}" + tx1)
      EFT4 = move(_x-2+wz3, _y-5-32,_x+wz4,_y-5+50+wz5)+blur(32) + color1("FFFFFF")+alpha1(60)+alpha3(255)+frz(65)+fad(100,100)
      ass_main(ASS_BUF, SubL(l,l+130,sj2),EFT4 ,"{\p4}" + tx2)

return (ASS_BUF, TCAS_BUF)

脚本内容如上
请问要怎么修改