查看: 12538|回复: 6

[完整特效] [jiji]004_Clannad ~After Story OP1 [复制链接]

jijidata

Script Dev.

Rank: 5 Rank: 5

电梯直达

楼主

发表于 2013-11-19 03:00:16 |只看该作者 |倒序浏览

本帖最后由 jijidata 于 2013-11-19 04:15 编辑

from tcaxPy import *
from s import *
from gdiFont import * #加入GDIfont模块
import math
import random
def tcaxPy_Init():
global _FontFileName
global _FaceID
global _Fs
global _TextWidth
global _TextHeight
global _TextLength
global _TextAdvDiff
global _ResolutionX
global _FD
global _TextInitX
global _Ascender # 字体上行高度
global _Descender # 字体下行高度通常为负数
global _H
_H = GetVal(val_FontSize)
_FontFileName = GetVal(val_FontFileName)
_FaceID = GetVal(val_FaceID)
_Fs = GetVal(val_FontSize)
_Ascender = GetVal(val_Ascender) #字体上行高度
_TextHeight = GetVal(val_TextHeight)# 第i句卡拉OK歌词的j个字符的高度
_TextWidth = GetVal(val_TextWidth)# 第i句卡拉OK歌词的j个字符的宽度
_TextLength = GetVal(val_TextLength)# 第i句卡拉OK歌词的文字总长度
_TextAdvDiff = GetVal(val_TextAdvanceDiff)# 从初始位置到第i句卡拉OK歌词的j个字符的水平步距
_TextInitX = GetVal(val_TextInitX)
_ResolutionX = GetVal(val_ResolutionX)
_FD = 1000 / GetVal(val_FXFPS)
global GdiFont #GDIfont
GdiFont = gfInitFont(GetVal(val_FontFaceName), _Fs, GetVal(val_Spacing), GetVal(val_SpaceScale), 0, False)
global Font
Font = InitFont(GetVal(val_FontFileName), GetVal(val_FaceID), _Fs, GetVal(val_Spacing), GetVal(val_SpaceScale), 0xFFFFFF, 0, 0)
def frxyz():
X1 = randint(-720,720)
X2 = randint(-720,720)
X3 = randint(-720,720)
return frx(X1)+fry(X2)+frz(X3)
def tcaxPy_Main(_i, _j, _n, _BT, _ET, _SK, _KT, _X, _Y, _A, _TXT):
ASS_BUF = [] # 用于保存ASS特效
_7X = _X - int(_A / 2 + 0.5)
_7Y = _Y - int(_H / 2 + 0.5)
if _i == 0:
ass_main(ASS_BUF,SubL(_BT+_j*5-_n*5,_BT+_SK,1),an(5)+b(1)+bord(0)+blur(0)+pos(_X,_Y)+alpha(255)+color1("000000")+t(0,5+_SK*1.28,alpha(0)) ,_TXT)#入场效果
ass_main(ASS_BUF,SubL(_BT+_SK,_BT+_SK+_KT+30,1),an(5)+bord(0)+blur(1)+color1("000000")+fad(0,200)+pos(_X,_Y)+org(_ResolutionX*0.5,0)+t(frz(-5)) ,_TXT)#表现方式
for j in range(5):
ass_main(ASS_BUF,SubL(_BT+_SK,_BT+_SK+_KT+90,2),an(1)+blur(2)+move(_X-20,_Y,_X+randint(-600,0),_Y+randint(-50,50))+t(fsc(0,0))+t(frxyz())+color3("000000")+fad(0,300)+fsc(40,40),"{\p3}m 0 0 l 50 49 l 100 0 l 51 50 l 100 100 l 50 51 l 0 100 l 49 50 l 0 0 m 45 45")
if _i == 1:
ass_main(ASS_BUF,SubL(_BT+_j*5-_n*5,_BT+_SK,1),an(5)+bord(1)+b(1)+blur(4)+pos(_X,_Y)+alpha(255)+color3("D080C7")+t(0,5+_SK*1.28,alpha(0)) ,_TXT)#入场效果
ass_main(ASS_BUF,SubL(_BT+_SK,_BT+_SK+_KT+30,1),an(5)+bord(1)+b(1)+blur(5)+color3("D080C7")+fad(0,200)+pos(_X,_Y)+org(_ResolutionX*0.5,0)+t(frz(-5)) ,_TXT)#表现方式
for j in range(20):
ass_main(ASS_BUF,SubL(_BT+_SK,_BT+_SK+_KT+90,2),an(1)+blur(4)+bord(1.5)+move(_X-20,_Y,_X+randint(-600,0),_Y+randint(-50,50))+t(fsc(0,0)+frxyz())+color3("D080C7")+fad(0,300),"{\p3}m 21 16 b 17 16 17 23 21 23 b 25 23 26 16 21 16 m 24 19 l 43 20 l 24 20 m 18 19 l 0 20 l 18 20 m 20 16 l 21 0 l 22 16 m 20 23 l 21 40 l 22 23")
if _i == 2:
ass_main(ASS_BUF,SubL(_BT+_j*5-_n*5,_BT+_SK,1),an(5)+bord(1.5)+b(1)+blur(4)+pos(_X,_Y)+alpha(255)+color3("A14840")+t(0,5+_SK*1.28,alpha(0)) ,_TXT)#入场效果
ass_main(ASS_BUF,SubL(_BT+_SK,_BT+_SK+_KT+30,1),an(5)+bord(1.5)+b(1)+blur(5)+color3("A14840")+fad(0,200)+pos(_X,_Y)+org(_ResolutionX*0.5,0)+t(frz(-5)) ,_TXT)#表现方式
for j in range(20):
ass_main(ASS_BUF,SubL(_BT+_SK,_BT+_SK+_KT+90,2),an(1)+blur(1)+bord(1.5)+move(_X-20,_Y,_X+randint(-600,0),_Y+randint(-50,50))+t(fsc(0,0)+frxyz())+color3("5D4740")+fad(0,300),"{\p3}m 21 16 b 17 16 17 23 21 23 b 25 23 26 16 21 16 m 24 19 l 43 20 l 24 20 m 18 19 l 0 20 l 18 20 m 20 16 l 21 0 l 22 16 m 20 23 l 21 40 l 22 23")
if _i == 3:
ass_main(ASS_BUF,SubL(_BT+_j*5-_n*5,_BT+_SK,1),an(5)+bord(1)+b(1)+blur(4)+pos(_X,_Y)+alpha(255)+color3("A14840")+t(0,5+_SK*1.28,alpha(0)) ,_TXT)#入场效果
ass_main(ASS_BUF,SubL(_BT+_SK,_BT+_SK+_KT+30,1),an(5)+bord(1.5)+b(1)+blur(5)+color3("A14840")+fad(0,200)+pos(_X,_Y)+org(_ResolutionX*0.5,0)+t(frz(-5)) ,_TXT)#表现方式
for j in range(20):
ass_main(ASS_BUF,SubL(_BT+_SK,_BT+_SK+_KT+90,2),an(1)+blur(4)+bord(1.5)+move(_X-20,_Y,_X+randint(-600,0),_Y+randint(-50,50))+t(fsc(0,0)+frxyz())+color3("76BDB2")+fad(0,300),"{\p3}m 21 16 b 17 16 17 23 21 23 b 25 23 26 16 21 16 m 24 19 l 43 20 l 24 20 m 18 19 l 0 20 l 18 20 m 20 16 l 21 0 l 22 16 m 20 23 l 21 40 l 22 23")
if _i > 3 and _i < 8:
ass_main(ASS_BUF,SubL(_BT+_j*15-_n*15,_BT+_SK,1),an(5)+bord(1.5)+b(1)+blur(3)+fax(-3)+fsc(10,30)+move(_X+20,_Y-60,_X,_Y,0,600)+color3("00FFFF")+t(0,600,fax(0)+fsc(100,100)) ,_TXT)#入场效果
ass_main(ASS_BUF,SubL(_BT+_SK,_BT+_SK+_KT+20,1),an(5)+bord(1.5)+b(1)+blur(3)+color3("00FFFF")+pos(_X,_Y)+t(fsc(0,0)) ,_TXT)#表现方式
points = gfGetPoints(GdiFont, _TXT) #GDIfont
PIX = PixFromPoints(points) #GDIfont
InitPosX = _X - int(_A / 2 + 0.5) + PIX[0][0] # 第一个像素的X轴坐标
InitPosY = _Y - int(_Fs / 2 + 0.5) + PIX[0][1] # 第一个像素的Y轴坐标
for h in range(PIX[1][1]): # 开始纵向扫描
PosY = InitPosY + h # 当前像素Y轴坐标
for w in range(PIX[1][0]): # 开始横向扫描
PosX = InitPosX + w
X = PosX-randint(-50,50)
Y = PosY-randint(-50,50) # 当前像素X轴坐标
idx = 4 * (h * PIX[1][0] + w) # 脚标
PixR = PIX[2][idx + 0] # 当前像素的红色分量
PixG = PIX[2][idx + 1] # 当前像素的绿色分量
PixB = PIX[2][idx + 2] # 当前像素的蓝色分量
PixA = PIX[2][idx + 3] # 当前像素的透明度
if PixA != 0: # 如果当前像素不为透明则进行如下操作
ass_main(ASS_BUF, SubL(_BT+_SK-10,_BT+_SK+_KT+randint(0,80),1, Pix_Style),an(7)+move(PosX,PosY,PosX-randint(-20,20),PosY+30+randint(-20,20))+fad(0,300+randint(-100,100))+alpha(255-PixA)+blur(1)+shad(0)+bord(0)+color1("00FFFF"), "{\p4}m 7 0 b 2 0 1 4 1 6 b 1 8 2 12 7 12 b 12 12 13 8 13 6 b 13 4 12 0 7 0 ")
for j in range(math.ceil(_KT)):
J = [math.ceil(_KT)]
step1 = (_KT*10*(j-1)/(max(J)*10-1))
XC1= _X+_A*(j+1)/max(J)-_A
YC1= _Y+_Fs*(j-1)/max(J)*(-1)**_j*0.3
XC2= _X-randint(90,160)
YC2= _Y+randint(-40,40)
CurveMove = move(XC1,YC1,XC2,YC2)
ass_main(ASS_BUF,SubL(_BT+_SK+step1,_BT+_SK+_KT+step1+80,2),an(5)+blur(4)+bord(0.5)+vc1("00FFFF","00FFFF","FFFFFF","FFFFFF")+fad(0,300)+frxyz()+color3("00FFFF")+CurveMove,"{\p3}m 21 16 b 17 16 17 23 21 23 b 25 23 26 16 21 16 m 24 19 l 43 20 l 24 20 m 18 19 l 0 20 l 18 20 m 20 16 l 21 0 l 22 16 m 20 23 l 21 40 l 22 23")
if _i > 7:
va3 = "\\3va(&HAF&,&HAF&,&H00&,&H00&)"
ass_main(ASS_BUF,SubL(_BT-80+_j*3,_BT+_SK,1),an(5)+bord(1.5)+b(1)+blur(6)+moves4(_X+randint(-50,-40),_Y+randint(-50,15),_X,_Y+randint(-75,75),_X+150,_Y++randint(-150,150),_X,_Y,0,400),_TXT)#入场效果
ass_main(ASS_BUF,SubL(_BT+_SK,_BT+_SK+_KT,1),an(5)+bord(1.5)+b(1)+pos(_X,_Y)+t(0,_KT*4,fr(randint(-4,4))+fsc(140,140)+color3("FFFFFF")+bord(5)+blur(8))+t(_KT*4,_KT*10,fr(0)+fsc(100,100)+va3+bord(2)+blur(5)) ,_TXT)
for k in range (10):
start = _BT+_SK-_KT
end = start+70
blink = alt(start,end, t = 30 , FX1 = alpha(255), FX2 = alpha(0), offset = 0, a1 = None,a2 = None)
sx = randint(-50,50)
sy = randint(-120,-70)
sy2 = sy + randint(120,180)
ass_main(ASS_BUF,SubL(start ,end,2),an(5)+blur(4)+bord(0.5)+shad(0)+fad(300,300)+frxyz()+color("FFFFFF")+color3("BCB4FB")+fsc(randint(120,170),randint(120,170))+move(_X+sx,_Y+sy,_X+sx,_Y+sy2)+blink,"{\p3}m 30 23 b 24 23 24 33 30 33 b 36 33 37 23 30 23 m 35 27 l 61 28 l 35 29 m 26 27 l 0 28 l 26 29 m 29 23 l 30 0 l 31 23 m 29 33 l 30 57 l 31 33")
if _i == 13 and _j > 11:
for j in range(20):
ass_main(ASS_BUF,SubL(_BT+_SK+randint(-20,-10),_BT+_SK+_KT+randint(50,70),2),an(5)+blur(random.uniform(1, 4))+bord(random.uniform(0,1))+shad(0)+fs(0)+fad(300,300)+move(_X+randint(-10,10),_Y-randint(-10,10),_X+randint(-100,100),_Y+randint(-70,70))+t(fs(0)+frxyz())+color1("00FFFF")+color3("00FFFF"),"{\p2}m 21 -2 b 18 -1 13 7 14 7 l 14 5 b 12 8 12 14 12 14 l 14 16 l 12 15 b 11 20 14 23 14 23 l 12 22 b 12 23 14 25 15 25 l 14 25 b 15 26 16 27 16 27 b 17 28 19 33 20 36 l 21 36 b 20 34 18 30 17 26 b 19 25 20 22 22 20 l 20 20 l 22 18 l 21 18 b 23 15 23 13 23 10 l 22 8 l 23 8 b 24 8 23 4 23 3 l 21 4 l 22 1 l 21 -2 m 20 3 b 17 8 16 16 17 22 b 16 23 15 7 20 3")
return (ASS_BUF, None)

复制代码

依旧是移植之前写的template模板，有少许修改，中间那部分的曲线有少许瑕疵，衔接不完美，于是想着由于tcax支持像素字就加了试试效果，看看能不能糊弄覆盖过去，嘛~也大概差不多，找机会会修复的..

预览：
http://pan.baidu.com/s/1y27Mq

1 查看全部评分

我们的夏天

收藏1

jijidata

Script Dev.

Rank: 5 Rank: 5

沙发

发表于 2013-11-22 00:42:37 |只看该作者

# tcc file version
< tcc file version = 1.000 >
# mode configuration
< inherit ass header = false >
< k mode = syllable >
< text layout = horizontal >
< tcaxpy init = true >
< tcaxpy user = false >
< tcaxpy fin = false >
# py settings
< py file = jiji-004.py > < beg line = 1 > < end line = 0 >
< k-timed ass file = Clannad ~After Story_k.ass >
< font file = DFMrm3.ttc > < font face id = 2 > < font size = 40 >
< fx width = 1280 > < fx height = 720 > < fx fps = 23.976 >
< alignment = 2 >
< x offset = 10 > < y offset = 20 >
< spacing = 0 > < space scale = 1.000 >
# style settings
< font face name = "" >
< bord = 1 > < shad = 0 >
< primary color = FFFFFF > < secondary color = 000000 > < outline color = A14840 > < back color = 000000 >
< primary alpha = 0 > < secondary alpha = 240 > < outline alpha = 0 > < back alpha = 240 >
# additional settings
< blur = 0.000 >

复制代码

tcc

1 查看全部评分

milkyjing

dawntop

正式会员

Rank: 4

板凳

发表于 2013-12-26 22:29:03 |只看该作者

刚学这个脚本，新手问：为什么我用这个脚本出现下面的错误：
TCAX version 1.2.0 [2012-08-03] [Anniversary]
(C) Copyright 2009-2012 milkyjing

Traceback (most recent call last):
File "E:\studio\Subtitles\tcaxDon\theDawn\part2.py", line 52, in tcaxPy_Main
ass_main(ASS_BUF,SubL(_BT+_j*5-_n*5,_BT+_SK,1),an(5)+b(1)+bord(0)+blur(0)+po
s(_X,_Y)+alpha(255)+color1("000000")+t(0,5+_SK*1.28,alpha(0)) ,_TXT)#入场效果
TypeError: b() takes no arguments (1 given)
Fatal Error: failed to execute the tcaxPy_Main() function in the 1(th) user tcax
py script.
INFO: Task failed!

温馨提醒: 如果不清楚造成本错误的原因, 请保留本窗口截图以及当前特效工程,
访问 http://tcax.rhacg.com/forum.php?mod=forumdisplay&fid=38 发帖以获取帮助.

请按任意键继续. . .

jijidata

Script Dev.

Rank: 5 Rank: 5

地板

发表于 2013-12-26 23:51:03 |只看该作者

dawntop 发表于 2013-12-26 22:29
刚学这个脚本，新手问：为什么我用这个脚本出现下面的错误：
TCAX version 1.2.0 [2012-08-03] [Anniversar ...

b参数是个给定值
其实是主程序tcaxPy.py有点小错误，奶大说会在下个版本解决，我直接在里面修改了
解决方法看这里：
http://www.tcax.org/forum.php?mo ... &extra=page%3D1

dawntop

正式会员

Rank: 4

5^#

发表于 2013-12-31 16:40:00 |只看该作者

Thank you.

zpcoop

正式会员

Rank: 4

6^#

发表于 2015-7-15 16:51:23 |只看该作者

from s import错误

xiaoyu

正式会员

Rank: 4

7^#

发表于 2015-8-11 16:19:29 |只看该作者

from s import错误,怎么解决呢？

Seekladoom

正式会员

Rank: 4

8^#

发表于 2021-8-20 21:11:05 |只看该作者

本帖最后由 Seekladoom 于 2021-8-20 23:09 编辑

第110行的blink目的是想做类似AutoTags一样的效果吗？

blink = alt(start,end, t = 30 , FX1 = alpha(255), FX2 = alpha(0), offset = 0, a1 = None,a2 = None)

复制代码

常用自定义函数AutoTags及其变种的介绍
http://www.tcax.org/forum.php?mod=viewthread&tid=1230

Python版的AutoTags：

import math
class autotag:
def __init__(self, intervalo1=0, intervalo2=0, dato1="",
dato2="", pause=0, delay=0, line_dur=0):
self.intervalo1 = intervalo1
self.intervalo2 = intervalo2
self.dato1 = dato1
self.dato2 = dato2
self.pause = pause
self.delay = delay
self.resultado = ""
self.suerte = ""
self.contador = 0
self.line_dur = line_dur
def autotags(self):
count = math.ceil(self.line_dur / self.intervalo1)
for i in range(count):
if i % 2 == 0:
self.suerte = self.dato1
else:
self.suerte = self.dato2
self.resultado += "\\t({0}, {1}, {2})".format(i*self.intervalo1, (i+1)*self.intervalo1, self.suerte)
return self.resultado
def autotags1(self):
count = math.ceil(self.line_dur / (self.intervalo1+self.pause))
for i in range(count):
if i % 2 == 0:
self.suerte = self.dato1
else:
self.suerte = self.dato2
self.resultado += "\\t({0}, {1}, {2})".format(i*(self.intervalo1+self.pause), (i+1)*self.intervalo1+i*self.pause, self.suerte)
return self.resultado
def autotags2(self):
count = math.ceil(self.line_dur / self.intervalo1)
for i in range(count):
if i % 2 == 0:
self.suerte = self.dato1
else:
self.suerte = self.dato2
self.resultado += "\\t({0}, {1}, {2})".format(i*self.intervalo1+self.delay, (i+1)*self.intervalo1+self.delay, self.suerte)
return self.resultado
def autotags3(self):
count = 2 * math.ceil(self.line_dur / (self.intervalo1 + self.intervalo2))
d = math.ceil((self.intervalo2 - self.intervalo1) / count)
t = [0]
for i in range(count):
t.append(t[i] + self.intervalo1 + i * d)
if i % 2 == 0:
self.suerte = self.dato1
else:
self.suerte = self.dato2
self.resultado += "\\t({0}, {1}, {2})".format(t[i], t[i+1], self.suerte)
return self.resultado

复制代码

Seekladoom

正式会员

Rank: 4

9^#

发表于 2021-8-20 21:37:55 |只看该作者

本帖最后由 Seekladoom 于 2021-8-20 23:56 编辑

在这个帖子中找到了，果然是类似AutoTags的闪烁字幕效果：
主要是MOD的tag 不是很實用自己都沒怎麼用過

代码如下：

def alt(BT,ET, t = 100 , FX1 = alpha(255), FX2 = alpha(0), offset = 0, a1 = None,a2 = None): #交替t效果默认闪烁
n = 1
T = ''
for i in range(int(t)+ int(offset),(ET-BT)*10,int(t)):
if n % 2 != 0 :
X1 = [str(i-t),str(i),a1,FX1]
T1 = '\\t('+','.join(str(x) for x in X1 if x != None)+ ')'
T += T1
else:
X2 = [str(i-t),str(i),a2,FX2]
T2 = '\\t('+','.join(str(x) for x in X2 if x != None)+ ')'
T += T2
n += 1
return T

复制代码

注：这个def alt我尝试直接添加到tcaxPy.py文件中去，结果跑tcax命令行时就出现了这样的提示：
【图1】
alpha未定义.png

然而alpha在tcaxPy.py文件是有定义的，具体如下图所示：
【图2】
问题分析？.png

搞清楚原因了，def alt必须放到def alpha后面（如图2，def alpha在第645行，def alt在第660行）才不会出现name 'alpha' is not defined（名称alpha未定义）的情况。
因为def alt本身是一个带有多个变量的复合函数，其中用到的变量对应的函数（比如alpha变量对应的def alpha）若是被放到def alt后面的位置就会无法顺利读取，导致出现name 'alpha' is not defined（名称alpha未定义）的情况。

之前图1的情况就是因为def alt被放在了第450行，而def alpha在第600多行的位置才发生的。

这里附上我在mccoy39082的基础上（tcax.py Version 8.0.0.2）修改过的tcaxPy.py文件（mccoy39082帖子下的2楼回复），各位朋友直接放进tcax的根目录下替换原先的tcaxPy.py文件即可：

tcaxPy.py (46.86 KB, 下载次数: 5347)

如此一来也可以省去from s import *这行代码了，根据上面摸索出来的规则就可以把s.py的内容转移到tcaxPy.py文件中并进行测试了。

返回列表

帐号		自动登录	找回密码
密码			新人加入